When you have sized batteries is 1.5V or 3V, but need a voltage 9VDC, DC converter circuit to help you for sure!
Some problems in the electronics job, can modify or bring devices
come to apply available not difficult If we know the principles and
limitations of those devices. As the project is being offered at this
time, will be bringing sized batteries 1.5 volt connected through an
electronic circuit called dc converter to increase the voltage to have
higher value be 9 volt instead of the battery 6 pack, connected series.
It can also increase the voltage from the battery 3 volt to 9 volt as
well be the original circuit, and it will allow more current.
Properties of the IC TL496
- A TL496 be control circuit of the power supply, by the circuit was
designed, so that the output voltage is 9 volt. For the change of the
input voltage, which comes from the battery 1 or 2 pack. The TL496
operates in a switching regulator, the power loss is less than the
typical linear regulator.
Read more source: http://www.eleccircuit.com/micro-dc-converter-3v-to-9v-using-tl496/