Wide stereo system circuit by TL082
Added dimension to get sound of music wider stereo system.
Suitable for, you are tired of the original sound. I’m not making you
uncomfortable with electronic projects difficult, and expensive.
This circuit enhances the Joy of musical level. The principle is easy
to understand, and with a simple, inexpensive equipment. The love of
the instrument, do not miss this project. Before building, I understand
the principle well.
The working principle.
-We will feel that Sound has the width more depth with the stereo mix.
(Signal was split left and right.) Both together. For example, usually
the guitar sound is right side and there is electone sound is left side.
However, this circuit makes the guitar sound mixed into the right side
slightly. Then take the audio electone, came into existence with left
side. We therefore feel that the sound wide up as soon.
-In the circuit, on the left and right stereo signals into the circuit,
will through C1- C2 to pin 3 – pin 5 of IC1(TL082), out to the 1 pin – 7
pin, And some signal is fed back to pin 2, pin 6 by VR1, R5 and R6 each
side.
-In the middle leg of the VR1 / 1(50K) and VR1 / 2(50K) near 1 leg, So
left signal is fed back into the 2 leg. The output signal also the left
side intact.
-But when leg move closer to the middle of 3 leg is the right side
signal, From the 7 pin of IC1 / 2(TL082) through VR1 / 2, R7, VR1 / 1
and R5 to pin 2, Makes output at pin 1 is the signal right side mix.
Likewise Pin 1 is the signal left side of the right side leg six mixed
the signal to IC1 / 2 as well.
The first may have confused some readers But read it again to understand more. If you understand already.
Read more and view circuit